The explosion-proof power junction box has a cable inlet and two electric heating cable outlets. Single and two-way electric heating cables are universal. There are three terminals in the junction box, which can meet the use of two-core and three-core electric heating cable.

The explosion-proof temperature thermostat is used in conjunction with the electric heating cable. It can control the temperature of the heated pipe on site so that the medium temperature can be controlled within the temperature range required by the process, thus protecting the electric heating cable and saving energy. It is designed and manufactured according to the requirements of increased safety explosion-proof electrical appliances. It is suitable for explosive gas environments in the first and second zones of the factory.

Temperature controller special for MI mineral insulated heating cable can control the temperature of the heat tracing pipe on site, so that the medium temperature can be controlled at the temperature required by the process, thus protecting the electric heating cable and achieving energy saving. It is designed and manufactured according to the requirements of explosion-proof electrical appliances. Applicable to the explosive gas environment in the division 1 and 2 of the factory.

The Explosion-proof power connection box(cabinet)is used to connect the power cord to the heating cable. It is fixed on the pipeline or installed near the pipeline through the bracket.

It is designed and manufactured according to the requirements of increased safety or explosion-proof electrical appliances. Applicable to the explosive gas environment in the division 1 and 2 of the factory.

AH connection box is used for connection between power and heating cable. It is fixed on pipe. It is designed and manufactured according to the requirements of increased safety or explosion-proof electrical appliances.

It is applicable to division 1 and 2 of explosive environment, IIA-IIC hazardous area and flammable dust environment division 21 and 22.

A temperature sensor is a meter that converts temperature variables into a standardized output signal that can be transmitted. It is mainly used for measurement and control of industrial process temperature parameters. It is equipped with display instruments to detect the actual temperature of the surface of the pipeline at any time.

Our company customizes various explosion-proof temperature sensors such as PT100, K type, Cu50 type according to customer requirements.

The heat-resistant fiberglass tape is also called fixed tape, formed by coating a special adhesive on a glass fiber belt. The bandwidth is 20 mm, the thickness is 0.1-0.3 mm, and the length is 20 m (type A) or 30 m (Type B), the maximum temperature can reach 200 °C. In the electric heat tracing system, the electric heating cable is fixed in the radial direction of the pipe every 50 cm by this tape during heating cable installation.

The aluminum tape is an adhesive tape formed by coating a thin aluminum paper tape with a special adhesive, the width is 50 mm, the thickness is 0.1 mm, and the length is 20 m (type A) or 50 m (type B). It is mainly used in electric tracing systems for fixing electric heating cables, temperature sensor, or auxiliary fixing for flexible electric heating cables. In addition to its ability to facilitate the installation and fixation of electric heat tracing, it mainly increases the heat dissipation area and is beneficial to heat conduction.